NANO COATING TECHNOLOGY

Revolutionary & Patented Nano Ceramic Technology

Easy Treatment of Engine: Restore, Repair & Protect

Nano spherical ceramic powder manufacturing,Platinum coating technology and nano dispersion & absorption technology. The combination of Platinum coated ceramicnano powder has great advantage for engine restorationwith endurance of high temperature, humidity, superior lubrication andgreat combustibility without side-effect.

The restoring ability could be well harmonized with platinum coated nano ceramic powder. Our uniquely developed platinum coated ceramic is 20 times stronger than steel and Platinum is helpful for great combustibility & powerful engine.

Restoring Process of Nano Energizer. Excellent Ceramic cermet coating nano ceramic powder mixed with engine oil restoresworn-out parts of engine.Cracked parts have high electric potential and charged particlesare moved selectively into cracked parts.Tight platinum metallic cohesion is conducted by heat and pressure.After restoring, cracked parts of engine is recovered and nano powder forms lubricant membrane on inner wall of engine.

BENEFITS:

• Smoother, Quieter Engine with more Power & Economical Solution.
• Fuel savings up to 8-21 %(up to 40% in idle mode)
• 5 times lowered noise and vibration levels.
• Restores friction surfaces and protects against wear 100 times reduction of the friction coefficient.
• Increased oil pressure & great combustibility.
• Brings engine power up to 100%3-9 times reduction in CO and CH in the exhaust
• Good for the environmentsafe & guaranteed

How to use?

Injection Objects:Nano Energizer recommended for automobiles at least 3,000 km of use.The effect is better for old cars.It can be used for any type of cars that uses mineral and synthetic oil.

Injection Period:Injection is available at anytime, but effective period iswhen engine oil is being changed.Recommended to change Nano Energizer upon driving 30,000km.Wear resistance of the protective coating is guaranteedwithin 1year at any running.

Injection Method:Warm up engine after change engine oil. Shake Nano Energizer enough before injection, as subsidence may occur for long storage.Open oil filler cap and inject Nano Energizer slowly.Close oil filler cap and keep idle for 20 minutes or drive 30km.

Distributor in Malaysia:

NANOTECH ENTERPRISE

Shoplot 34-0, Block D, Riverside Plaza
Kingfisher Ph.2, Kuala Inanam
88400 Kota Kinabalu, SABAH
Tel & Fax: 6-088 -432195
Mobile: 016 8325071
Email: hseqadvisor@yahoo.com

BS STANDARDS TRAINING IN MALAYSIA

Venue: Kuala Lumpur

· Implementing ISO 14001:2004 (4-5 June 2010)

· Understanding BS 25999 BCM (7-8 June 2010)

· Implementing ISO 20000:2005 (10 – 11 June 2010)

· ISO 14001:2004 Lead Auditor (14 – 18 June 2010)

· BS 25999 Lead Auditor (14 – 18 June 2010)

· Effective QMR Skills Development (15 – 16 June 2010)

· ISO 13485:2003 Internal Auditor (16 – 18 June 2010)

· Implementing an OHSAS 18001:2007 (21 – 22 June 2010)

· Implementing ISO 13485:2003 (21 – 22 June 2010)

· OHSAS 18001:2007 Lead Auditor (21 – 25 June 2010)

· ISO 27001:2005 ISMS Lead Auditor (21 – 25 June 2010)

· AS 9100 Lead Auditor (21 – 25 June 2010)

· ISO 9001:2008 QMS Internal Auditor (22 – 23 June 2010)

· ISO 27001:2005 ISMS Implementation (22 – 24 June 2010)

· ISO 20000:2005 Internal Auditor (28-30 June 2010)

· ISO 14001:2004 Internal Auditor (29 – 30 June 2010)

· BS 25999 Internal Auditor (29 – 30 June 2010)

For more information, kindly contact:

Mr Allan (hseqadvisor@yahoo.com / 016 8325071)

Ms Evelyn

BSI Management Systems Malaysia Sdn Bhd

Suite 19.05 , Level 19 Wisma Goldhill
65 Jalan Raja Chulan
50200 Kuala LumpurT: 03-2032 2252 Ext 110 / 012-2122 576F: 03-2032 2253

E: evelyn.chye@bsigroup.comW: www.bsigroup.com

CIDB GREEN CARD

Required documents :
ONE PHOTOSTAT IDENTIFICATION CARD MALAYSIAN
ONE COPY SPM/STPM/MATRICULATION/DIPLOMA
ONE PASSPORT SIZE PHOTO

CIDB green card application form from : http://www.cidb.gov.my/v6/files/upp1latest.pdf
Safety and Health in Construction Note Book are provided. Free one Safety Helmet.

What is the CIDB Green Card?
This is an integrated program that involves the registration and accreditation of Construction Personnel to enhance safety levels at Construction work sites.

Why must you register?

• To ensure that Construction Workers are aware of the importance a safe and healthy working place;
• To provide a basic knowledge on safety and health at the Construction work site;
• To inform Construction Workers of the legal requirements in relation to safety and health.
• Automatically covered by a special Insurance Scheme that insures the Construction personnel against death and accidents.

Who should register?
All personnel working in Construction Sites.

When to register?
If you are working in Construction Sites, you must obtain your Green Card before entering the Construction Site.

What is the CIDB Green Card?
This is an integrated program that involves the registration and accreditation of Construction Personnel to enhance safety levels at Construction work sites.

Why must you register?

• To ensure that Construction Workers are aware of the importance a safe and healthy working place;
• To provide a basic knowledge on safety and health at the Construction work site;
• To inform Construction Workers of the legal requirements in relation to safety and health.
• Automatically covered by a special Insurance Scheme that insures the Construction Personnel against death and accidents.

Who should register?
All personnel working in Construction Sites.

When to register?
Now! If you are working in Construction Sites, you must obtain your Green Card before entering the Construction Site.

Where to register?
Contact CIDB Headquarters, Regional Offices or Branches.

Category Classification
General Worker - GW A general worker who does not require special skills. General workers does the general works at the construction site.
GW - General Worker
GL - Local General Worker
GF - Foreign General Worker
Semi-Skilled Construction Worker- XW
A worker who owns certain skills in one or more trade which is not listed in Table 3, Act 520, which is acceptable and determined by CIDB.
XW - Semi-Skilled Construction Worker
XL - Local Semi-Skilled Worker
XF - Foreign Semi-Skilled Worker
Skilled Construction Worker A worker who owns certain skills in one or more trade which is listed in Table 3, Act 520, which is acceptable and determined by CIDB.
SW - Skilled Construction Worker
WL - Local Skilled Worker
WF - Foreign Skilled Worker
Construction Site Supervisor A worker who is in charge to supervise works carried out in construction site.
SS - Construction Site Supervisor
SL - Local Site Supervisor
SF - Foreign Site Supervisor
Construction Site Manager A worker who is in charged to manage works carried out in construction site.
MG- Construction Site Manager
ML - Local Site Manager
MF - Foreign Site Supervisor
Site Administrative Personnel A worker who is incharge of administration at the construction site.
AD - Site Administrative Personnel
AL - Local Site Administrative Personnel
AF - Foreign Site Administrative Personnel
Construction Personnel Accreditation
"The Board must accredit and acknowledge skilled construction workers and construction site supervisors according to the predefined methods."
ACT 520, Part VII Accreditation and Acknowledgement of Skilled Construction Workers and Site Construction Supervisors Section 32.(1)
The accreditation process involves all skilled workers and site supervisors from local to foreign workers.

Takaful Scope Coverage for Construction Personnel
All card holders aged between 16 to 65 years will be covered 24 hours (working and non-working hours) around the globe.
Takaful Benefit Scope
Benefit Amount (RM)
Accidental Death : 21,000.00
Disability Due to Accident: Maximum 18,000.00
Normal Death: 3,000.00
Whole-body Disability : 3,000.00
Funeral Expenses: 500.00
Hospital Benefits Due to Accidents: 25.00/day (maximum 30 days)

Takaful Claim Procedures
Accident occurs within valid period of the green card.
Applicant/nominee must forward the UPPT � 1 duly completed claim form not more than 60 days from the date of accident.
The Green Card Holder does not have any criminal offenses

5-Day Project Management Professionals (PMP) Course @ 22-26 March 2010,Kota Kinabalu.

Malaysian Professional Services Development Corporation (MYPSDC) is conducting a 5-Day Project Management Professionals (PMP) Course on 22-26 March 2010 at Promenade Hotel, Kota Kinabalu, Sabah. PMP is the world's most recognized credential for individuals associated with project management. Fee: RM900 only.

Interested?

Pls contact me: Mr Allan
016-8325071 / Email: adumbong@yahoo.com

ANNOUNCEMENT: NEW COURSES IN EAST MALAYSIA!!!

ISO 14001: 2004 ENVIRONMENTAL MANAGEMENT SYSTEM (EMS)
- Introduction to EMS (1 Day)
- Implementing & Documenting EMS (2 Days)
- Lead Auditor (5 Days)

Scheduled to be in March 2010, Kota Kinabalu.


OHSAS 18001:2007 OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM (OHSMS)
- Introduction to OHSMS (1 Day)
- Implementing & Documenting OHSMS (2 Days)
- Lead Auditor (5 Days)

Scheduled to be in May 2010, Kota Kinabalu.

INTERESTED, PLS CONTACT: 016-8325071/ Email: hseqadvisor@yahoo.com